FreeMotion represents a product series of single-axis free motion joints, suitable for individual orthopedic devices of the upper
and lower extremity for children, adolescents and adults. The joint can be used individually, but is also an ideal companion joint
for the MultiMotion or MultiStatic joint.
The FreeMotion joint is available in the sizes Small and Medium, each in the following
configurations: with modular bar adapter or with integrated bars with or without the T-bar. Accessories for the FreeMotion joint
include an alignment tool and various bars.
- Proximal
and distal a modular bar adapter
- Proximal a bar adapter, distal
with T-bar
- Proximal integrated bar, distal with T-bar
- Proximal and distal integrated bars
• Bar width: 12 mm (small), 16 mm (Medium)
• Bar thickness: 3 mm
• Material: stainless steel
Features:
Intended use: this tool eases the alignment of the FreeMotion Joints on the cast. This alignment unit is suitable for multiple use.
FreeMotion Alignment Unit:
Item No | Size |
Length
|
Width
|
Height
|
Offset
T-Bar
|
Height Floor
to Hinge
Pivot Point
|
Weight |
Material
|
Joint
Head
Diameter
|
Proximal
Upright
Connection |
Distal
Upright
Connection
|
---|---|---|---|---|---|---|---|---|---|---|---|
FM03M-12 | Small | 93 mm | 12 mm | 11 mm | -- | 46 mm | 40 gr | Steel | 18 mm | Bar Adapter | Bar Adapter |
FM03MT-12 | Small | 97mm | 12 mm | 11 mm | 10 mm | 50 mm | 72 gr | Steel | 18 mm | Bar Adapter | Integrated T-Bars |
FM03B-12 | Small | 400 mm | 12 mm | 11 mm | -- | 50 mm | 102 gr | Steel | 18 mm | Integrated Bars | Integrated Bars |
FM03BT-12 | Small | 250 mm | 12 mm | 11 mm | 10 mm | 50 mm | 106 gr | Steel | 18 mm | Integrated Bars | Integrated T-Bars |
FM04M-16 | Medium | 97 mm | 16 mm | 11 mm | -- | 48 mm | 52 gr | Steel | 22 mm | Bar Adapter | Bar Adapter |
FM04MT-16 | Medium | 105 mm | 16 mm | 11 mm | 10 mm | 55 mm | 88 gr | Steel | 22 mm | Bar Adapter | Integrated T-Bars |
FM04B-16 | Medium | 400 mm | 16 mm | 11 mm | -- | 200 mm | 140 gr | Steel | 22 mm | Integrated Bars | Integrated Bars |
FM04BT-16 | Medium | 260 mm | 16 mm | 11 mm | 10 mm | 55 mm | 134 gr | Steel | 22 mm | Integrated Bars | Integrated T-Bars |
Accessories:
Intended use: T-bar for correct alignment of joints on the positive Cast.
T-Bar:
Intended use: all bars are supplied pre-drilled for optimum fixation. The bars have a high rigidity and are available in two different
sizes and several designs.
Joint Bars: