MultiMotion Dynamic Corrective System Joint
The corrective joint allows efficient treatment of dynamically correctable contractures. Contractures with a neurological cause
are treated according to the LLPS principle (Low Load Prolonged Stretch), and contractures caused by injury or postoperatively can
also be treated statically during rehabilitation as desired.
The dynamic correction system joint ensures fast efficient and adequate
treatment of contractures due to neurological and orthopedic diseases. The system joint is used in orthoses - both for children and
adults.
MultiMotion joints are available in sizes medium and large. In addition, these components come in configurations with a modular bar adapter or with integrated bars and/or T-bar. In addition to an alignment unit, various types of joint bars are available as accessories for MultiMotion.
- Torque output possible in flexion or extension.
- Range of Motion: +95° to -95°.
- Adjustable flexion and extension stops.
- Locking- and unlocking possible in virtually any position.
- Torque Output Infinitely adjustable.
- Adjustable 0 point.
- Medial and lateral access to torque output set screw.
- Material: steel/stainless steel, plastic.
- Infinitely adjustable dynamic extension or flexion of the joint.
Features:
-
Improvement/rehabilitation of joint mobility.
-
Secure and step-wise joint mobilization.
-
Elongating/mobilizing spastic musculature.
-
Strengthening the musculature.
-
Improvement of the resting position.
-
Prevention of cartilage damage and ulcers.
Benefits in Achieving Therapy Goals:
-
Amputation
-
Apoplexy
-
Cerebral palsy
-
Cranial cerebral trauma
-
Dystrophies
-
Endoprosthesis implant
-
Fracture
-
Ligament rupture
-
Multiple sclerosis
-
Paresis
-
Spina Bifida
Indications:
- Ankylosis
- Fibrosis
- Ossification
Contraindications:
| Item No | Size |
Bar
Width
|
Joint
Thickness
|
Offset
T-Bar
|
Height Floor
to Hinge
Pivot Point
|
Weight | Material |
Housing
Diameter
|
Maximum
Torque
|
Proximal
Upright
Connection |
Distal
Upright
Connection
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| MM04M-12 | Medium | 12 mm | 19 mm | -- | 64 mm | 125 gr | Steel | 36 mm | 4.1 Nm | Bar Adapter | Bar Adapter |
| MM04MT-12 | Medium | 12 mm | 19 mm | 10 mm | 56 mm | 154 gr | Steel | 36 mm | 4.1 Nm | Bar Adapter | Integrated T-Bars |
| MM04B-12 | Medium | 12 mm | 19 mm | -- | 270 mm | 210 gr | Steel | 36 mm | 4.1 Nm | Integrated Bars | Integrated Bars |
| MM04BT-12 | Medium | 12 mm | 19 mm | 10 mm | 56 mm | 125 gr | Steel | 36 mm | 4.1 Nm | Integrated Bars | Integrated T-Bars |
| MM05M-16 | Large | 16 mm | 24 mm | -- | 75 mm | 268 gr | Steel | 50 mm | 8.4 Nm | Bar Adapter | Bar Adapter |
| MM05MT-16 | Large | 16 mm | 24 mm | 10 mm | 73 mm | 303 gr | Steel | 50 mm | 8.4 Nm | Bar Adapter | Integrated T-Bars |
| MM05B-16 | Large | 16 mm | 24 mm | -- | 250 mm | 405 gr | Steel | 50 mm | 8.4 Nm | Integrated Bars | Integrated Bars |
| MM05BT-16 | Large | 16 mm | 24 mm | 10 mm | 73 mm | 268 gr | Steel | 50 mm | 8.4 Nm | Integrated Bars | Integrated T-Bars |
